Field Test: Apogee Rosetta 200 Stereo Converter

Apr 1, 2005 12:00 PM, By Barry Rudolph

HI-DEF UNIT CHOCK FULL OF MASTERING FEATURES

Polls


Mix Regional

The Mix Regional section for Mix's September 2014 issue focuses on Miami. Send us your studio news: updates, sessions, new rooms, plus club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

The Rosetta 200 ($1,995), Apogee's successor to the PSX-100 and Rosetta's AD namesake, is an “investment-grade quality” piece of studio equipment that will continue to pay dividends every day. The latest in thinking from Apogee on stereo 24-bit/192kHz A/D and D/A converter systems, the 200 starts off with many of the features and the same converter quality as the Rosetta 800 8-channel unit, while adding full channel metering and MIDI I/O and S/PDIF connections. The 200 also comes with the new and unique CODA audio finishing module, an original and irresistible set of analog/digital processors unavailable with other AD/DA — even those made by Apogee.

SPECIAL FEATURES
The Rosetta 200 accepts and outputs all formats of digital audio including single- and double-wire AES for 88.2 through 192kHz rates and either ADAT S/MUX or S/PDIF. In fact, you can convert between S/MUX and S/PDIF. Sample rates are switchable between 44.1, 48, 88.2, 96, 176.4 and 192 kHz.

Apogee's Intelliclock uses a “read” clock with a wide acceptance range to quickly lock to any incoming digital audio. Once a two-sample audio buffer is filled, a second low-jitter “write” clock re-clocks the buffer's output to the converters. Lock is instant with minimal latency. Sync source or clock can be set to internal or derived from the rear panel word clock BNC I/O connectors (now with switchable 75-ohm termination). You can clock from any incoming digital sources presented to the rear panel's S/PDIF, AES/EBU, ADAT optical ports or from the expansion I/O card slot.

There are three optional expansion I/O cards ($595 each) available: the X-HD or X-Digi-Mix cards for direct connection to Pro Tools|HD or MIX Plus Core cards, and the X-FireWire card for Mac OS X or Windows XP host-based DAWs. The X-FireWire card enables full MIDI interfacing to a computer but is not required for loading downloaded software updates from a computer via the unit's rear panel MIDI ports. A USB port seems better for updating as most computers have them and not a MIDI interface.

TAKE ME TO THE CODA
CODA comprises three separate processes: sample rate conversion, Apogee's UV22HR word length reduction algorithm and Aptomizer. Built-in real-time sample rate conversion is a lifesaver when making reference 44.1 CD copies of work done at 96 kHz or incorporating samples, loops, audio clips or sound effects into your session that are not at the same rate. You can sample rate-convert digital audio from any single input to another digital output and check quality on the analog outputs. In my testing, I could not detect any change in sound quality when sample rate converting — ever.

For CD mastering, the 200 comes with UV22HR, Apogee's 24 to 16-bit dithering process, allowing 16-bit CDs to retain more of the quality and resolution of their 24-bit masters. Aptomizer is a kind of analog normalization with a Learn mode in which the maximum analog level is read and used to recalibrate the A/D input level, resulting in consistent -0.5dBfs digital levels.

In cases where the 200 is doing AD/DA for interfacing a piece of analog gear inserted into your DAW system, unity system gain is preserved by also adjusting the D/A calibration level simultaneously! But if you are using the 200 for your main DAW I/O, this is a bad idea because the analog output level of the D/A will go down/up along with the calibrated level of the A/D. There should be a way to unlink the D/A when using Aptomizer.

A separate processor from CODA, Soft Limit is an analog limiter that rounds off transient peaks for maximum -4dBFs levels using instantaneous attack and release times.

IN THE STUDIO
My D/A tests started by connecting CD and DAT machines via S/PDIF. An Analog Devices AD1852 chip handled D/A conversion within the 200 and my DATs. Mastered CDs that I had mixed revealed new information and detail. The 200's D/A was clearer throughout the whole frequency range, with a wider stereo image, a more solid low end and high-frequency extension — but not brighter.

At a mastering facility where I thought quality differences — if any — would be easier to hear, I compared the 200 to a $5,000 Prism ADA-8 system. The digital sources to the 200 and the Prism were clocked from a Z-Systems Z-3SRC. The differences were subtle: The Prism had a very slightly deeper bass or just more bass and possibly a little more high-frequency openness.

As a “torture” test, I set up a mix and purposely slammed the 200 with many “overs,” letting Aptomizer learn the song's loudest moments. What normally is for me an ongoing process throughout a mix — tweaking the analog level to the A/D — now takes just one pass. When I kicked in Soft Limit, I got the hottest digital levels possible without applying any stereo compression.

READY FOR HI-DEF
I'm completely sold on this modern and worthy unit that is more than up to the critical task of A/D conversion. Besides the great sound of the converters, Aptomizer is a “level insurance policy,” saving tedium and time in the studio. As a production tool, real-time sample rate conversion is great if you're a producer who always uses a 44.1kHz session rate because you like using 44.1kHz sample CDs; you can go 96 kHz — no excuses now!

Apogee Electronics, 310/915-1000, www.apogeedigital.com.

Click here to find out more about Apogee's expansion cards, which allow direct connectivity between Pro Tools Mix systems and Apogee 200 and 800 converters.

Click here to download the 200's data sheet, study its cables and connectors and more.







Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.