SPL Atmos 5.1/ASM 5

Nov 1, 2000 12:00 PM, GEORGE PETERSEN

Polls


Mix Regional

The Mix Regional section for Mix's September 2014 issue focuses on Miami. Send us your studio news: updates, sessions, new rooms, plus club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

SURROUND RECORDING SYSTEMS A new product based on "innovative microphone technology" all too often turns out to be just a low cost knock-off of a classic studio condenser. For that reason alone, we should all take notice when something truly different and special comes along. Different and special, the Atmos 5.1/ASM 5 Surround Recording System certainly is. Much more than just a microphone, the Atmos system pairs a specialized rackmount 5.1 recording console from SPL with Dirk Brauner's ASM 5 Adjustable Surround Microphone.

Both SPL and Brauner are German manufacturers, and both are known for high-tech, high-performance products. SPL has found success in the analog, tube and digital domains with devices such as Vitalizer, Transient Designer, Loudness Maximizer, Machine Head and Charisma. Brauner is established as a top-end microphone maker and is responsible for the VM1, considered by many as one of the best studio mics in production today. The ASM 5 uses five VM1 capsules in an array designed for surround recording. Though the Atmos 5.1 console and ASM 5 mic array are available separately, the combination of the two creates a powerful, yet easy-to-use package.

THE ATMOS 5.1 CONSOLE Housed in a five-rackspace chassis (with an outboard 1U power supply), the Atmos 5.1 is essentially a 5-channel mixing console with five XLR mic inputs, plus a large multipin input connector for the ASM 5 microphone array's 12-pair cable. It should be noted that though the Atmos is designed for use with the ASM 5, the user is free to use any combination of other mics with the system. However, the ASM 5 provides excellent performance right out of the box, with minimal experimentation.

The Atmos 5.1 front panel features backlit mechanical VU meters and gain controls for the five mic inputs (left/center/right/surround left/surround right). Input channels may be fed from either the ASM 5 or the five discrete mic inputs, and each channel has switches for mic pad, polarity reverse, +48 VDC phantom power, insert in/out, a choice of 50Hz or 100Hz highpass filters. Bus switches route each signal to the center, L/R, Surround Left/Surround Right or direct output buses. Each channel also has a rotary fader and controls for determining divergence and Front/Surround and LCR positioning. A pair of stereo aux inputs - with their own peak LEDs and level pot - can be routed directly to the L/R, SL/SR and center buses. The Atmos 5.1's rear panel has balanced XLR and unbalanced 11/44-inch connectors for the five channels (direct outputs), monitor and master outputs and insert point send/returns on every input.

A slick feature puts the (servo motor-controlled) trim pots of all five channels under a single control. This mode, which is engaged via a small pushbutton near channel five's gain switch, comes in handy when the band plays at a softer level during soundcheck, but cranks it up during the actual take. Precise level matching is essential for maintaining a coherent soundstage when multimiking for 5.1, and the motorized fader control is a real plus.

Spread controls for the front and surround channels allow users to tweak the stereo soundstage of the fronts and/or surrounds and also dial in the distance separating the front and surround mics. Thoughtfully, both spread sections include mono and bypass switches for making quick A/B comparisons or checking for any possible compatibility issues when either the fronts or surrounds are summed to mono. Two 9-LED phase meters indicate the relative correlation between the L/R and SL/SR channels, and six 20-segment LED meters show 5.1 output levels.

The monitor section has a large, ganged volume control that simultaneously drops the level of all six (5.1) channels evenly. Speaking of outputs, the Atmos 5.1 includes balanced analog outputs for the six outputs - control room (varied by the monitor pot), as well as the main outs, which may be routed to the multichannel storage medium of your choice. Besides the six discrete monitor outputs, a stereo headphone jack and a 6-pin DIN connector for Sennheiser's Surrounder headphones are provided. One of the Atmos 5.1's most distinctive features is a set of five pots that remotely determine the polar pattern of each of the VM1 capsules; all are continuously variable from figure-8 to cardioid to omni, and anything in between. Also, it should be emphasized that the system's discrete outputs are designed to route directly to a recorder/workstation, etc. No surround encoders are included so the user can select whatever is necessary (AC3/SDDS/DTS/etc.) or nothing at all, depending on the job at hand.

Interestingly, the ASM5 mic system has no dedicated sub-bass mic element. Any LFE or subwoofer information is derived from the L/R bus, the SL/SR or center channel bus. Here, a 130Hz lowpass filter can be switched in-line with the rear panel XLR sub output.

IN THE STUDIO As noted above, the ASM5 offers remote pattern selection for each mic element. The large, pentagonal array also allows each capsule to physically swivel 180ø (ñ90ø) along a horizontal axis, allowing for an almost inexhaustible number of array variations. The ASM5's LCR (front) mic heads are placed in a triangle with each capsule 17.5 cm from the center. They can be electronically "moved" using the Front Spread and Divergence controls on the Atmos. The further two SL/SR capsules are about 60 cm to the rear with a 60ø adjustment range. The custom multipin snake cable that attaches the ASM5 array to the Atmos 5.1 mixer is 25 meters long, and longer cables can be ordered.

Having used these VM1 capsules before (albeit connected via tube electronics in the Brauner VM1), I was anxious to hear how they'd perform in a multimiking application via discrete solid-state electronics. I was not disappointed. Obviously, SPL made a major issue of performance when designing the Atmos 5.1 system. The mic preamps are triple gain-stage, low-noise designs with Lundahl input transformers, illuminated switches and relays with gold-plated contacts. The preamps are an excellent match for the mic capsules. Noise was nonexistent, and even under highly dynamic conditions, such as when miking a four-piece percussion group, the Atmos 5.1 was up to the task, offering ample headroom and tight transient response, while preserving low-level detail in quiet passages. One thing that intrigued me during this session was the system's ability to capture extremely diverse frequency ranges and delivering thunderous low end - despite the fact that there is no dedicated LFE mic element - while capturing all the upper harmonics of the crotales and stacked bells.

Before using the system, I expected that placement would be critical. However, I found that using the system is fairly instinctual and even fun, especially with all the variable parameters (continuous polar patterns, arm placement adjustments and capsule rotation on the mics, while experimenting with the spread, pan and divergence controls at the console).

In later sessions, I used the Atmos system to mike an acoustic guitar/mandolin ensemble and a standard, five-piece, rock 'n' roll drum kit. I became even more comfortable with the system, and in both cases was rewarded with a natural sound. The mic array is consistent at different distances, and there really is no magic "sweet spot" to be concerned with. Certainly, the imaging becomes more "in-your-face" (or perhaps more accurately "in-your-ears") when the array is placed directly over the source and becomes less pronounced as the front of the array is drawn back to a distance from the source. In cases where a tight overhead placement is employed, the aux inputs on the Atmos 5.1 can come in handy to add a pair of preamped stereo ambience mics to pick up additional room character. Yet, at any configuration during these dates, I was impressed by the lack of phase anomalies - there were no frequency roll-off or pattern dropouts when the 5.1 tracks were collapsed to stereo.

The SPL Atmos 5.1/ASM 5 is an extraordinarily powerful tool for the creative recordist. Priced at $27,990, it's definitely a significant investment, but one that could be promoted as a major hook for drawing certain clients into a commercial studio. And to encourage users to try Atmos out, distributor Group One also offers the system on a rental basis.

Dist. by Group One, Ltd., 200 Sea Lane, Farmingdale, NY 11735; 631/249-1399; fax 631/753-1020; www.g1ltd






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.