Cakewalk by Roland V-Studio 700 System Review

Jul 1, 2009 12:00 PM, By Tony Nunes



Education Guide

Mix is gearing up to present its longstanding annual Audio Education Guide in its November 2014 issue. Want to have your school listed in the directory, or do you need to update your current directory listing? Add an image, program description, or a logo to your listing! Get your school in the Mix Education Guide 2014.

Ins and Outs

The V-700R integrates with the V-Studio via USB 2. Also sold separately for I/O expandability, the V-700R houses a Roland Fantom VS hardware synth stocked with more than 1,400 patches and a slot for a Roland ARX sound expansion card (the same one that's used in the Fantom G keyboard). The Fantom VS works as a VSTi soft synth offering low-latency performance without CPU strain. The rack offers 19 inputs and 24 outputs at 44.1/48 kHz, 15 inputs and 20 outputs at 88.2/96 kHz, and five inputs and 10 outputs at 192 kHz. However, when changing the sample rate, you have to power down, which is a bit time-consuming when changing sessions.

The V-700R's front panel is sleek, with only a power switch, a rotary sample-rate selector and LED metering for all I/O and sync source. The rear panel is packed with connections ranging from eight balanced/unbalanced inputs on separate XLR and TRS jacks, 10 balanced/unbalanced TRS outputs, XLR stereo main outs and TRS sub outputs. Digital I/O includes Digital 1 (AES/EBU on XLR or S/PDIF), Digital 2 (ADAT optical) and BNC word clock I/O. MIDI I/O, a USB port and a proprietary port for the V-700C complete the rear panel connections.

At Home With the V

I started by patching the V-700R's main outs into my home studio's active monitors and created a new 24-bit/88.2kHz session. I inserted SONAR's Session Drummer 2 over eight tracks, plugged my electric guitar into the V-700C's aux DI, called up Guitar Rig 3 and dialed in an amp simulation. While balancing my mix, an obtrusive noise came through the monitors whenever I touched any fader and my guitar. I tried different guitars and cables to rule out my equipment but the noise was consistent. A test recording verified that the noise was included in the file; all of the other V-700R inputs were fine. This was also verified by Cakewalk, which reproduced the noise when recording guitar through the DI and an M-Audio ProjectMix I/O.

After spending a couple of hours with the V-700C, I got around the unit and software intuitively. Plug-in manipulation was a breeze with ACT, which brilliantly mapped SONAR's TL-64 and VC-64 plug-ins to the Channel Strip Control section. I also appreciated how quickly I could access all of the different SONAR views from the Access Panel, while the T-Bar combined with SONAR's X-Ray kept my plug-ins from cluttering up my screen's real estate. I could engage mic controls on the V-700C or SONAR's V-Studio 700 Property applet, with the expected 48-volt, pad, polarity and highpass filter.

In the Studio

For the studio session, I used 23 pre-recorded 24-bit/96kHz tracks with the intention of overdubbing live drums using all eight of the V-700R's mic preamps. The V-700C doesn't have a talkback mic, so I used the talkback on the studio's SSL console. This system is targeted to the home studio user, yet it would benefit greatly from a simple talkback mic, button and output.

Setting mic pre levels with the faders in I/O Control (mic pre) mode was a breeze, but latency reared its ugly head. According to SONAR's Audio Options, the minimum buffer setting resulted in a total round-trip latency of 8.8 ms, which is intolerable for recording live instruments. The remedy was to feed the cues via direct hardware monitoring on the V-Studio's Property page (Direct Mix tab). The downside is that Direct Mix can feed only the main, sub or digital outs. The mains were feeding the control room monitors, leaving only the sub outputs available, which receive their level control from the same potentiometer that controls the speakers. The bottom line: There's no way to control monitor and cue volume separately. I had to feed the cues to the sub outs and was careful not to make any adjustments to the “Monitor” knob while tracking. The ability to send the direct mix out of other outputs would be a simple software routing feature I'd like to see in future releases.

The preamps were clean and detailed, offering plenty of gain and pads for accommodating the hottest signals. My spaced pair of stereo overheads for the drums (Neumann U87 Ai condensers) provided good imaging, sharp snare transient response and smooth high-frequency detail. Mixing the results sounded very good. Another engineer familiar with the pre-recorded tracks commented that this was the best they had ever sounded to him. After the initial recording, I decided to test the V-700R's digital connectivity with a MOTU 8Pre by feeding the optical inputs. At 48 kHz, this successfully expanded my mic input count to 16 without any problems.

All You Ever Need?

While there are some downsides in the fader/DI noise, lack of talkback or cue system and the need to reboot for sample-rate changes, you can work around these issues fairly easily. The V-700C is a full-blooded control surface that's tightly integrated with SONAR. Top features include EQ and plug-in manipulation with the Channel Strip Control and the Access Panel's quick View changes. The V-700C's faders are a step above the rest with unique features such as Channel Branch mode and locking faders.

The V-700R is a solid 24-bit/192kHz USB interface with a plethora of inputs and outputs that sound clean, detailed and unbiased. The expandable Roland Fantom VS Synth is attractive to keyboardists and also saves CPU load, although it would make more sense for the synth to be a priced option or allow other SONAR synths to take advantage of the Fantom's processing power. As for SONAR 8, it's a tried-and-true DAW capable of anything you throw at it, and with its 64-bit processing engine it sounds exceptional.

The bottom line is that the V-Studio 700 is a well-bundled system bringing versatile, pro-level DAW control to the musician.

Tony Nunes is a consultant and engineer, and builds a lot of his own gear.

Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95



Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.