KRK Systems ERGO Review

Oct 1, 2009 12:00 PM, By Barry Rudolph

AFFORDABLE, POWERFUL ROOM CORRECTION FOR DAWS AND MORE

Polls


Mix Regional

The Mix Regional section for Mix's July 2014 issue focuses on Atlanta. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

ERGO uses 1,024 dynamic filters to correct audio playback for two separate monitor systems.

ERGO uses 1,024 dynamic filters to correct audio playback for two separate monitor systems.

KRK's Enhanced Room Geometry Optimization (ERGO) is a stand-alone room acoustic correction system built into a hardware monitor controller unit. Its proprietary RoomPerfect technology corrects a room's phase and frequency anomalies with the clear aim of realizing an acoustic space where crucial mixing decisions and overall sonic balances will translate to the outside world.

Simple, Yet Powerful

The ERGO unit includes a volume control and A/B speaker-selector buttons; a lighted thumbwheel level control for headphones is mounted on its side. The Focus/Global button toggles between Focus, which focuses correction on the mixing “sweet spot,” and Global for a wider area of correction. Holding the Focus/Global button triggers Bypass mode. ERGO's rear panel has ¼-inch TRS jacks for balanced analog inputs and A and B speaker outs; a S/PDIF RCA jack input; a headphone jack; two FireWire ports; a Calibrate mode button; and the measurement mic's input.

The ERGO system applies electronic corrections in the band of frequencies from 20 to 500 Hz by using 1,024 dynamic filters running at up to 96 kHz. By narrowing the focus of frequencies and by using all available DSP, ERGO achieves greater precision in both the measurement and subsequent correction processes. To measure a room using the included measurement microphone, ERGO requires a FireWire connection to either a PC or Mac running the ERGO Cal software. Once a measurement is made, its data is stored inside of the unit with no further computer connection required.

At the Proving Grounds

Here at my Tones 4 $ Studios, I have huge low-frequency issues. To try to reign in the problem, I installed bass trapping, diffusion and absorption panels. Afterward, I still heard so much bottom-end information in the 300 to 500Hz range that I (wrongly) compensated for it, which resulted in mixes that sounded very thin and spectrally poorly balanced when played outside of my room.

KRK ERGO summary

After installing the ERGO Cal software and connecting ERGO, I followed the onscreen steps and measured my room at different points. Each mic position adds to the system's “Room Knowledge.” This process takes about 15 minutes.

I normally monitor my Pro Tools HD Accel rig digitally using the Digidesign 192 I/O's AES/EBU enclosure output and the D/A converter in a Crane Song Avocet monitor controller. So I connected ERGO between the analog stereo monitor +4dBm line outputs of the Avocet's speaker set 1 and my ADAM Audio S2.5A powered monitors. In this way, all connected monitor sources (CD player, 2-track deck, video, etc.) benefit from ERGO's correction.

I also used ERGO's S/PDIF input and preferred its D/A conversion (using an AKM AK4396 chip) to the Avocet's conversion. The disadvantage of this hookup is that only the audio coming out of a DAW gets room correction. But if you need a monitor controller, by using ERGO's D/A or FireWire I/O you avoid using an extra pair of AD/DA conversions for the most pristine monitor path possible.

Ergo, My Mixes Improved

ERGO has made a marvelous change in the accuracy of my monitors. With the LF problems ironed out, the individual tracks within the mix are clearer, making it easier to discern problems and make more accurate EQ decisions. Stereo imaging is the best I've heard, which makes precise pan positioning easier and the application of stereo-width effects — reverbs, delays, micro-delays and phase trickery — more exact. The only downside to using ERGO was “zipper” noise when adjusting volume. (KRK is aware of this problem and is working on a solution.) Also, there should be multiple monitoring source selection switching.

My clients report that my mixes are now “dialed in” and “spot on.” There is solid low end without tubbiness and clarity without excessive treble boosts; vocals sit correctly, and dynamics respond accurately. I've been using ERGO mixing every day during a two-week period, and it has improved the quality of my work.

Barry Rudolph is an L.A.-based recording engineer/mixer. Visit www.barryrudolph.com.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.