Universal Audio Plug-Ins

May 2, 2013 9:00 AM, Mix, By Tim Dolbear

Models of Classic API EQs and Teletronix Leveler


Education Guide

Mix is gearing up to present its longstanding annual Audio Education Guide in its November 2014 issue. Want to have your school listed in the directory, or do you need to update your current directory listing? Add an image, program description, or a logo to your listing! Get your school in the Mix Education Guide 2014.

These plug-ins accurately model API’s legacy 550 and 560 EQs, including the signature API electronics.

These plug-ins accurately model API’s legacy 550 and 560 EQs, including the signature API electronics.

I have been a longtime user of UA’s DSP Accelerator cards, and I must say that a lot has changed since my first one in 1999. The emulations have grown beyond simply capturing the response curves to modeling the entire signal path of its hardware counterpart. I ran the review of these new plugs on Sequoia 12 running on a Windows 8 64-bit machine with all new SSD drives.

API EQ Collection

The New API EQ collection (see Fig. 1) comes with two models: the 550A EQ and the 560 Graphic EQ. Download, installation and registration went smoothly. Both EQ emulations modeled the entire signal path, including the famed API 2520 op amps and transformers. The 550A starts with a straightforward 3-band EQ. Each of the three bands uses a dual-knob step switch to dial in either the center frequency or boost/cut, and the high and low bands can be independently switched from Bell to Shelf. The 550A also includes a single switch to engage a Highpass/Lowpass filter that is preset to 50 Hz and 15 kHz. The 560 EQ is a 10-band graphic equalizer. On both units, there is an EQ bypass button, allowing users to skip the EQ filters but leave the component modeling active.

Moving the controls on the 550A can take place a few ways, either by clicking on the corresponding frequency you wish the control to point to or by moving the knobs, which felt awkward because it moves as a switch jumping to the next value. You can also use the “+” and “-” markers above the knobs for boost and cut. Below the band section of the GUI is the Filter switch—default is out, or to the left. Having the HP and LP filters on a single switch, as the hardware was originally designed, may have been good for use in broadcast back in the ’60s, but for music production, it’s a bit of a letdown that these are still tied together.

Below the Filter switch are the two shelf switches for the high and low bands, giving you the ability to change from Bell to Shelf. The bell shape on this EQ has a very useful and musical quality to its geometry. With small amounts of boost or cut, the bell is wide and smooth-sounding, broad, and musical. As you increase the boost or cut, the center frequency becomes predominant, and the bell shape narrows. With the high or low band in Shelf mode, the center frequency that you have dialed in becomes more of a suggestion, as the shelf seems to extend far beyond. For example, with the low band set to 50 Hz, boost it +12db in Shelf mode, and you will hear boosting happen up to about 200 Hz.

The 560 Graphic EQ was a pleasant surprise. They left my studio when I was 17 and learned what a parametric was, but now I am in love with the shaping, the interaction between bands and the low end. Dropping this onto a kick drum track was an ear opener—so much bottom end and yet still tight. Moving the frequency sliders is simple, and Control-clicking on the slider returns it to zero. You can also reset all 10 bands by clicking on the zero at the top of the plug-in.

The API EQs are known for their punch and low-end tightness. Part of that comes from the EQ’s band shaping, but also from the components inside the unit. Bypassing the EQ but leaving the plug-in on, you are able to hear the sound shaping going on. I placed a 550A or 560 on every track that didn’t have EQ and instantly heard a familiar sound—a more vibrant and upfront track. But if I had a dozen of the hardware units, they would all sound slightly different, and I believe perhaps the outcome would be even more drastic.

I like to consider these types of EQs as being hard EQ. You are given strict choices, specific frequencies, and you gain boost/cut in steps, so you are forced to use either +2dB or +4dB; there is no middle ground. The 560 of course gives you a slider for boost/cut, but it is a very small window for ±12dB. The frequency choices are set, too. If you want to boost 150 Hz on the 550A, the only way to do that was to add a second EQ to the mix.

We have come to expect a certain level of quality from UA, from the sound to the graphics to the company’s faithfulness in re-creating digital wonders of the real thing. When opening the API 550A EQ for the first time, the size and look of the plug-in is perfect, matching the hardware version to the point of making you want to reach for the knobs. But do we need another EQ collection? I believe it comes down to taste and workflow. Being able to have an API vibe across an entire mix is fun, and the results are tight and upfront.


On a rock track with two guitar parts, or really any time you have two of the same elements, place a 550A on one track and a 560 on the other because each plug-in addresses different fixed frequency bands. It’s easy to get a huge sound.


Company: Universal Audio

Product: API 500 Series EQ for the UAD-2 platform

Website: uaudio.com

Price: $299

Pros: Excellent-sounding EQ; captures the classic perfectly.

Cons: EQ gain steps and a very stylistic workflow limits its usefulness.

Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95



Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.