Slate Digital Virtual Console Collection Review

Jan 1, 2012 9:00 AM, By Barry Rudolph

DIGITAL SIMULATIONS OF CLASSIC CONSOLES FOR YOUR DAW

Polls


Mix Regional

The Mix Regional section for Mix's July 2014 issue focuses on Atlanta. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

Setups for each instance of the plug-in can be saved, named and then recalled.

Setups for each instance of the plug-in can be saved, named and then recalled.

MIX IT UP
For stereo mix bus processing, the Mixbuss plug-in has just two controls. The Console selector chooses which of the four modeled-console stereo mix buses is to be used, and the Drive control increases/decreases the coloration of the amplifiers and summing networks used in those consoles. There is a stereo VU meter, Group on/off and the same Group View facilities as the Virtual Channel plug-in.

Mixbuss comes alive when used as a group master for the entire DAW mixer. If a Channel instance is on every track, it is possible to audition your entire mix through any of the four consoles and set the amount of coloration globally using only the Mixbuss’ Drive control.

Both Virtual Channel and Mixbuss have sets of slide-out drawer menus for setting operational preferences. They let you calibrate the operating levels of the individual groups and all four consoles (i.e., run one console hotter than others), switch on/off console hiss during periods of no audio, set VU meter ballistics, LED clip threshold and sensitivity, plug-in display behavior and more. For more realistic modeling (which uses more CPU), there are choices of none (default), 2x, 4x or 8x over-sampling for real-time and offline rendering.

VCC IN THE MIX
I installed VCC Version 1.3.5 into my Mac Westmere 8-core with OS 10.6.7 and Pro Tools 9.0.3 HD|3 Accel installed; it requires an iLok2 dongle for authorization.

My first test was for an already finished mix that I was looking to hear as if it were mixed through an old Neve 8068 console. I opened a Virtual Channel on track 1’s insert slot 1, set it to Brit N Discrete, selected Group 1, set the Drive and Input controls to 2 o’clock, and saved it as a preset.

Next I used the Option + Control shortcut while inserting another Virtual Channel into track 2, causing it to populate the remaining tracks’ slot 1 across the entire mixer. I liked that VCC automatically changes from a mono to a stereo instance whenever required.

I systematically recalled the saved preset for each instance and renamed it, copying the track’s name in which it was inserted. Otherwise, the tracks will show up in the Group View Track List as Track 1, Track 2, etc. In Pro Tools 9, there is no automatic way or shortcut for doing this.

I then inserted Mixbuss on the stereo aux fader. I sometimes place a stereo limiter here because it feeds the mix to a stereo audio track. I set it to the same console as all the channels and designated it to be Group 1 Master.

For this 60-track mix, including effect returns, I got 60 mono and stereo instances of Virtual Channel running along with 43 other RTAS and TDM plugs (big reverbs, Melodyne, Slate’s FG-X, etc.). I also used Mixbuss instances on three backing vocals’ stereo submasters. With no over-sampling engaged, I got very stable operation and playback with CPU (RTAS) spikes to about 48 percent.

Because I dedicated the first slot across the entire mixer to Virtual Channel instances, I could bypass all of them, including the Mixbuss, by selecting Option + Command + Click on any plug-in instance. This is the most dramatic way to hear the overall effect of VCC. And dramatic it is—even with fairly conservative settings!

My mix now has more apparent loudness and sounds fatter, thicker and more glued together without doing much of anything. I did go through and re-adjust levels on a few tracks using the Control + Click shortcut, and lower either the Input or Drive levels because some of the plug-ins after VCC occasionally overloaded—an effort well worth the extra punch that you’ll get.

All of the controls on both Virtual Channel and Mixbuss are automatable, and I sometimes automated the Drive control and copied the data to all group master instances. This worked well when I wanted song choruses to “bloom” in harmonic thickness—they already increased in level and in stereo width, but still were not truly special until I did this little trick.

START WITH VCC
The best way to use VCC is to start a mix with Virtual Channels already in every first slot of the DAW mixer. Building the mix went better, and I found it easier to stabilize the tracks into a more cohesive whole. In general, harmonic distortion and character becomes pronounced on full-level sources when a Virtual Channel’s Input and/or Drive controls are advanced above 12 o’clock.

I also had good luck building a mix in stereo stems with each stem submaster processed by a different console model. I used the Brit N Discrete for a drum ’n’ bass stem, Brit 4k for the vocal stems, US A Discrete for keyboards and the “trident” mode for guitars.

On my drum ’n’ bass stem, I had the bass amp track as group master with input set to 1.3 dB and Drive at 2.3 dB. (A small pop-up window indicates these values.) On this stem, the Brit N Discrete was the most “colorfully distorted,” with USA A Discrete a close second. Brit 4K sounded the cleanest, with the “trident” model somewhere in between. Results vary and greatly depend on the program source and recorded level.

I liked running this drum ’n’ bass stem hard with the bass guitar amp track as group master. But there were places where the recorded bass amp track “blows up,” and the VCC process made it worse, so I automated the bass amp track’s Virtual Channel Bypass button for only those moments. This solved that issue without losing level, and thankfully it didn’t affect the rest of the channels in its group. Later, I chose another track in this group as master, yet the bass track retained the Bypass button automation information—what a good thing!

Slate Digital’s Virtual Console Collection is an amazing idea for a DAW plug-in. When used on all tracks or groups of tracks in your mix, it adds an indescribable richness and earthiness to the overall sound similar to a badly abused and overdriven vintage recording console. I love it!



Barry Rudolph is an L.A.-based recording engineer.

Click on the Product Summary box above to view the Slate Digital Virtual Console Collection product page.

Click on the Product Summary box above to view the Slate Digital Virtual Console Collection product page.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.