Waves Aphex Vintage Aural Exciter Review

May 1, 2011 9:00 AM, By Michael Cooper



Education Guide

Mix is gearing up to present its longstanding annual Audio Education Guide in its November 2014 issue. Want to have your school listed in the directory, or do you need to update your current directory listing? Add an image, program description, or a logo to your listing! Get your school in the Mix Education Guide 2014.

The Waves Vintage Aural Exciter sports an uncomplicated GUI.

The Waves Vintage Aural Exciter sports an uncomplicated GUI.

Originally introduced in the mid-’70s, the Model 402 Aphex Aural Exciter was an instant hit—but you couldn’t buy one. The few units that were built could only be rented at considerable expense. The seminal tube-powered processor, which added musically related harmonics to audio signals, was used on select studio sessions for such icons as Paul McCartney, Fleetwood Mac, James Taylor, Jackson Browne and Linda Ronstadt. Its ability to add and enhance detail and presence on both individual tracks and complete mixes earned the august processor a devoted following. Aphex subsequently produced low-cost, solid-state versions of the Aural Exciter for retail sale, but the original tube-based units were lost in the mists of time. Or so we thought.

More than 30 years later, Waves obtained the original hardware unit from Aphex’s storage and modeled its distinctive sonic character with the guidance of producer/engineer Val Garay, a high-profile Exciter user back in the day.

The cross-platform Waves plug-in is available singly in both TDM (TDM, RTAS, Audio Suite, AU and VST) and Native (all the foregoing formats except TDM) versions. It’s also included in the Waves Mercury bundle. Mono and stereo configurations and resolution up to 24-bit/192kHz render the Aphex Vintage Aural Exciter ready for both mixing and mastering duties. I tested the AU version of the plug-in in MOTU Digital Performer 7.2.1 using an 8-core Mac Pro running Mac OS 10.5.8.

Due to its phase-related idiosyncrasies, the original Model 402 produced different sounds when used on a mixer’s channel insert (MIX mode) vs. in an aux send/return path (AX mode, which was Garay’s modus operandi). Waves modeled both sets of sonic characteristics and assigned them to two respective modes for the plug-in, dubbed MIX2 and AX. The company anticipated that DAW users would also want the convenience of generating the AX mode’s response when the plug-in is used on a track’s insert, so the company created an additional mode for the plug-in, tagged MIX1, which does just that.

The upshot is that you should use either MIX1 or MIX2 mode—both of which blend generated harmonics with the dry signal— when the plug-in is instantiated on an individual track’s insert; you adjust the GUI’s AX MIX control to set how much Exciter effect you want to add to the dry signal. MIX2 mode audibly changes the frequency response of the signal, especially when high AX MIX control settings are used, so it’s most useful for coloring individual tracks. The more spectrally balanced MIX1 mode is suited to either mixing or mastering.

AX mode kills all dry sound at the plugin’s output, leaving only the Exciter effect. Use AX mode when the plug-in is placed on an aux to which you’ve bused your dry track. The AX MIX control is disabled in AX mode, so adjust the level of excitation using the dry track’s bus send. A fourth mode, BP, models the original hardware’s BP (bypass) mode, which was not a pure bypass and sounds slightly colored.

No matter which of the three active modes you use, the sound of the plug-in changes as you drive it harder. A wide-ranging input level control provides up to 18 dB of boost or attenuation to achieve the desired sound and manage headroom. The output level control, likewise, has a +/-18dB range. A VU meter (two meters for stereo configuration) shows either input, output or AX (harmonics) levels—selectable via a rotary switch—and sports a clip LED calibrated to 0 dBFS. You can recalibrate the meter’s headroom, which is 18 dB by default. Waves also modeled the 402’s analog noise. You can adjust the noise level of the plug-in from -48 to 0 dB (0 dB is commensurate with the original hardware’s noise level), or turn the noise off . You can also add 50- or 60Hz hum, modeled on the hardware unit’s power supply, or disable hum altogether. A and B workspaces are provided to help compare different setups.

Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95



Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.