Ask Eddie: Transducers Front and Back

Aug 1, 2011 9:00 AM, By Eddie Ciletti

THE HOW AND WHY OF MIC DIFFERENCES

Polls


Mix Regional

The Mix Regional section for Mix's May 2014 issue focuses on Nashville. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

GEEK: My friend Paul Wolff doesn’t like the moniker, but I embrace it. The positive connotation of “geek” describes someone who is happily hardwired for hardware and technology. I won’t share his negative connotation, in case you’re eating.

ONLINE EXTRAS

PLAY:
Ask Eddie Blog

READ:
All "Ask Eddie" Columns

READ:
More Gear Tips

TRUTH: D.I.Y.ers are learning from hands-on experience that it takes trial and error to get things right. Audio is an endlessly fascinating subject, and driving this trend is curiosity and the availability of obscure bits of audio history found on eBay and Craigslist. This resurgence of D.I.Y. tinkering is generating many great questions.

RECAP: In last month’s issue, when “Ask Eddie” debuted, the topic was console upgrades and needing to understand what power supplies do. As I write this, one week into July, three topics have already been posted to my new Mix Blog. Two related e-mails came from Europe, one from Greece asking why conventional phantom-powered studio condenser mics are not compatible with electret condenser mics (without an adapter). A German query about an obscure Grundig GCM 3 condenser microphone required some clarification about how phantom power differs from an external power supply.

So this month it’s...

TRANSDUCERS!
Microphones convert acoustic energy into electrical energy and loudspeakers reverse the process. We know a speaker can be used as a sub-kick mic, and I have even used a pair of cheap dynamic mics as headphones (when I was in ninth grade). Dynamic mics and speakers have three things in common: a magnet, a coil of wire and a diaphragm.

When an electrical current flows through a wire, it radiates a magnetic field. The speaker’s “cone” is connected to a coil of wire that lives in a magnetic field. We all know that variations in audio signal current move the cone—opposites attract. You can connect a 9-volt battery to any raw speaker and, depending on how the battery polarity is applied to the speaker terminals, the cone will move out—or in—and stay there!

Conversely, when you scream into a mic, the diaphragm pushes the coil into a magnetic field so that an electrical signal is generated. The signal is naturally balanced—two signals of opposite polarity appear across the two “voice coil” wires, also known as a “differential” signal. The benefit is improved noise immunity (details to come). A transformer matches the low-impedance voice coil (in the 10Ω to 20Ω range) to the standard mic impedance (200 Ω).

In a ribbon mic, the coil of wire is replaced by a thin strip of “corrugated” aluminum foil, just a few microns thick, that doubles as the diaphragm. Sound pressure moves the ribbon within a concentrated magnetic field, generating an electric signal. A transformer matches the foil impedance, which is less than 1Ω, to the standard 200Ω impedance.

Condenser mics are a different animal. The diaphragm material typically is Mylar, measuring 3 to 6 microns thick, with a metalized coating that is so molecularly thin you can see through it. The diaphragm is suspended like a drumhead over the back plate (a precision-drilled brass disc). The metalized coating and the back plate are conductors separated by an insulator (air). Together, this creates a capacitor; condenser is the olde-skule name.

When a fixed DC polarizing voltage (typically 40 to 80 volts) is applied to the diaphragm, the back plate will be grounded (though it can be the other way round). Sound pressure moves the diaphragm and modulates the DC voltage in the process. If you’ve ever used a synth, think of sound pressure “pushing” the modulation wheel, adding vibrato to a fixed pitch.

The modulated DC signal is extremely vulnerable and requires a very high-impedance amplifier, either vacuum tube or Field Effect Transistor (FET). In nearly all cases (except the Grundig GCM-3), the amplifier is located in the mic body. Vacuum tube amplifiers require a separate power supply with multiple voltages, while FET amplifiers were initially battery-powered, either externally (like the Sony C38) or internally (like the earliest version of the Neumann U87).

Electret condenser mics are typically found in computers, cellphones, cameras, portable recording devices, communications headsets, boom and “invisible” mics for stage, video and film. The electret condenser mic can be very small, requires very little power (for its built-in amplifier) and supplies its own polarizing voltage via the electret material, which is the electrostatic version of a magnet, storing an electrical charge instead of magnetism.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.