Correct Delay Compensation for TDM Hardware Inserts
Dec 2, 2008 12:24 PM, By Kevin Becka
Most Popular
advertisement
Polls
TalkBack
Why are ŇbigÓ sound systems going into not-so-big halls?? E-mail us at mixeditorial@mixonline.com.
Remix Hotel News
 |
Remix Hotel Miami 2009 |
Videos of master classes, panels and artist sessions now live!
This Month in Mix
Digidesign’s delay compensation works flawlessly as long as you are using Digidesign hardware interfaces. When creating a hardware insert on a Pro Tools TDM system using hardware other than Digidesign’s—specifically, the Apogee Rosetta 800 and Mytek 8x192 AD/DA—Pro Tools’ delay compensation will not correctly calculate the in/out delay. The system will make a “suggestion” of the latency required and apply it to all tracks, but if you listen to a copy of the track soloed side by side with a version carrying a hardware insert, they will not line up in phase. In addition, this “suggestion” changes from system to system, even with the same hardware.
We tested two identical rigs using Mac G5s with dual 2GHz processors with 2 GB of RAM using three Apogee Rosetta 800s, Big Ben Clock and Digidesign Sync IO, and the numbers varied from 11 to 63 samples. No matter what your system suggests as a solution, the total number of samples needed to correct the delay doesn’t change.
The procedure for creating an insert with the correct amount of delay, then testing it, is as follows:
• It’s important to check your tracks for phase lock during this process, so start by creating a copy of the track where the insert will reside, be sure to include the Active Playlist in the copy (Option + Shift + D)
• Create a hardware insert on one of the tracks
• Patch an analog device across the insert’s send/return or simply patch a cable across the insert’s send/return to complete the connection
• Turn on delay compensation by going to the Setup pulldown and choosing Playback Engine. Halfway down the window you’ll see the delay compensation pulldown. Choose the shortest buffer as delay compensation needs less than 150 samples. The system will save your session, shut down and then re-open your session with Delay compensation on
Fig. 1
• At the lower left hand corner of the Mix window, click on the screen icon and choose Delay Compensation (see Figure 1). This will bring up the delay compensation amount under each fader. Be sure your faders are fully expanded to the widest view (Command + Option + M)
• Our test system set the delay at 11 samples no matter the sample rate. The actual total amount of samples needed is based on the sample rate and is outlined in the chart below
Acceptable Use Policy blog comments powered by Disqus
Modern Recording and Mixing
This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95
Mastering Cubase 4
Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95
Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. 
QSC Q-Sys Integrated System Platform
Inside Odds On Records and Studios