Audio-Technica AT4060, July 1998

May 13, 2004 12:00 PM, By George Petersen



Education Guide

Mix is gearing up to present its longstanding annual Audio Education Guide in its November 2014 issue. Want to have your school listed in the directory, or do you need to update your current directory listing? Add an image, program description, or a logo to your listing! Get your school in the Mix Education Guide 2014.

Anticipated since 1994, when Audio-Technica first unveiled its AT4050 large-diaphragm studio condenser, A-T’s tube mic project may have been one of the worst-kept secrets in audio. Everybody knew this one was coming, but after beta testing on major-label sessions for a year or so (these guys at A-T are really careful), the AT4060 tube mic ($1,695) is finally here. Deliveries begin later this month, and this is one serious mic to reckon with.

The mic is a side-address design, shaped similar to the AT4050, although the AT4060 has a larger body and weighs in at a substantial 640 grams. The brass body has a tough matte-black finish. The cardioid condenser capsule uses an aged, 21.3mm-diameter vapor-deposited gold diaphragm. In keeping with its minimalist design, the AT4060 has no pad or HP filter in the audio path, and its extremely stable 6922 tube provides remarkably low noise for a tube mic. Combined with its maximum SPL handling of 149 dB (0.5% THD), the AT4060 offers enough dynamic range for nearly any session, whether hyper-analog or 20/24-bit.

A 10-meter cable with 6-pin Neutrik XLRs connects the mic to a 1U power supply with detachable rack ears. Of little use in a control room (unless your facility is prewired for 6-conductor mic lines), a rackable PS would ideally be mounted in a case, for transport/setup when several AT4060s are used on a session. The PS front panel has an AC switch and power LED; the rear has switches for ground lift and 120/230 VAC operation, along with the 6-pin XLR input and 3-pin male XLR output. The mic includes an industrial-strength shockmount: a cast aluminum frame with thick elastic cording suspending an inner cradle that holds the mic securely, yet provides superb isolation from kicks, slams, stomps and seismic phenomena.

Tube gear requires a warm-up period, so I powered up the AT4060 and listened to about five minutes of occasional pops, burps and some cool-sounding frequency sweeps that sounded like outcasts from the soundtrack of Ed Wood’s 1959 classic Plan 9 From Outer Space. After ten minutes, the AT4060 stabilized and was ready to go.

Using a Millennia Media HV-3 preamp, my first session with the AT4060 was recording male narration for an industrial training cassette series (hey, don’t laugh—these gigs pay really well). I noticed that the AT4060’s frequency response seems to go all the way down to subsonics—what would have been an attenuated breath pop on a lesser mic sounded like a hurricane on the AT4060. This thing would be great on pipe organ! My trusty Popper Stopper® screen about 2 to 3 inches in front of the mic took care of the breath noise, while placing the narrator 8 to 10 inches back from the AT4060 offered unhyped, natural reproduction.

On both male and female vocals, the AT4060’s proximity effect was just enough to add a nice bass edge to a singer who knows how to work a mic, yet it was never overbearing. More impressive perhaps was that the proximity effect was linear across the LF band, free of peaky frequency hot spots that can make certain notes jump out and muddy up a performance. Spec’d with a 20kHz bandwidth, the mic has a -3dB downpoint around 18 kHz—more than ample to capture the shimmering airiness on breathy vocals.

In the upper middle range of the scale, the AT4060 exhibits a very gently rising presence boost starting about 2 kHz, gradually edging up to a 2- to 3dB crest around 6 kHz and remaining linear to past 10 kHz. This worked out extremely well on male and female voices for a pinch of clarity and definition, without the brittleness that can result from a mic with overexaggerated top end. This presence provided a nice openness on grand piano, 12-string guitar and sax—instruments that can become shrill with the wrong mic.

Although it takes SPLs of 149 dB, I resisted the urge to use the AT4060 inside a rock kick, where air turbulence can permanently deform a delicate mic diaphragm. However, the AT4060 was nice and round on a double-headed jazz kick and excelled as a close mic on guitar and bass cabinets, offering power and punch while faithfully capturing the amps’ sound.

The bottom line? If you need a quality studio mic with an unexaggerated, natural sound that’s suitable to both male and female voices, as well as being an excellent all-around performer in a variety of studio tasks, the AT4060 could be just the ticket. Thumbs up on this one!

Audio-Technica U.S.,

Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95



Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.