Curtis Technology AL-2, April 2000

May 14, 2004 12:00 PM, By Steve Cunningham

STEREO TUBE MICROPHONE SYSTEM

Polls


Mix Regional

The Mix Regional section for Mix's July 2014 issue focuses on Atlanta. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

Despite so much recent consolidation of pro audio manufacturers-with big companies being absorbed by bigger ones-some of the most interesting products still come from small companies. Curtis Technology is one such manufacturer.

The company's first microphone design was the AL-1 tube condenser microphone, which has been in production since 1995. Curtis also builds a solid-state 8-channel mic preamp called the opre8 and has produced software for a British mixing board company. But Curtis has done a great deal of work outside the pro audio field, too. The company has also designed digital computer graphics hardware, touch screen systems, video arcade games and digital circuits. Recently, the manufacturer completed a contract to design cockpit electronics for use in the presidential Air Force one jetliner.

So, given this company's wide background in high-tech electronics, I wondered what sort of digital wizardry might be revealed when the Curtis AL-2 Stereo Microphone System arrived. As it turns out, the answer is none-the AL-2 Stereo Microphone System is all good old analog circuitry and tubes.

DESIGN
The Curtis AL-2 Stereo Microphone System consists of two tube condenser microphones that connect to a dual-channel power supply in a single-rackspace chassis. The microphones are about 5.5 inches long and a little less than 2 inches in diameter. Each microphone has a 2.2cm gold-free diaphragm, and a handpicked/hand-matched 12AU7 tube that's factory-tested for noise, gain and slew rate performance.

The microphones' aluminum bodies are nicely machined and appear sturdy, although the microphones are light for their size. Their look is simple and elegant, and the construction quality is excellent. A mesh screen covers the forward-facing diaphragm element, and the mics come installed in swivel shock-mount holders.

An included pair of Canare cables with 4-pin XLRs connect the mics to jacks on the front of the power supply. Also on the supply's front panel is a power switch with an LED power indicator. The back panel has two standard 3-pin XLR outputs and a ground-lift switch.

Removing the power supply's top panel reveals four custom-wound transformers, several unmarked capacitors and some metal film resistors on a sturdy PC board. In addition, between each channel of microphone input and power supply output is a cylindrical can that contains a power transformer. As I expected, there were no active elements visible in the power supply unit.

IN USE
I first used the Curtis stereo mics to record live bands at two separate dates in small clubs. I wanted a simple stereo recording of the band's stage sound and of the vocals in the P.A. systems. I positioned the mics on stands about 6 feet above the floor, and each was about 25 feet from the band at either end of the stage. The outputs of the power supply unit fed a Panasonic DAT recorder, via a pair of Avalon mic preamps.

Curtis recommends warming up the AL-2s for at least an hour before beginning a recording session to allow the tubes and voltages to stabilize. I did this, and at one hour the mics were warm to the touch, but not hot.

In this setting, the AL-2s exhibited elongated-cardioid directional characteristics. However, they were not "beamy" and picked up the entire stage while rejecting much of the crowd noise coming from behind them. The mics are well-matched as a stereo pair and yielded an accurately balanced stereo field with good imaging. They handled the SPL nicely throughout the evening, even as the band got substantially louder. Curtis claims a maximum SPL of 125 dB, and by the end of the evening when the band was really cranking, the Curtis mics showed no sign of breaking up. Most importantly, the mic's frequency response did not change between quiet acoustic songs and full-blown rockers.

Although I expected the AL-2s to exhibit the "warmth" commonly associated with tube mics, the Curtis mics were quite neutral-sounding. Electric guitars and vocals were crystal clear, as were the cymbals and hi-hat. The mics did an exceptional job on the drums, and both the snare and the toms came through crisp and clear. Keyboards and bass were also very clear, although the bass didn't sound as meaty as I would have liked. However, this may have had more to do with the amplifier backline and stage acoustics than with the Curtis microphones.

Later, I used the mics on a studio recording of a Martin 12-string acoustic guitar. one mic was pointed at the guitar's sound hole at a distance of about a foot, and the other was pointed at the bridge at a distance of about 3 feet. The resulting recording was highly detailed, with no hint of tubbiness. Switching the positions of the microphones so one was close to the bridge and the other was away from the guitar's sound hole yielded a brighter recording that would sit nicely in an ensemble mix.

For the final test, I recorded both male and female voice talent in a two-voice dialog setting. I set up the mics back to back and had the talent read the dialog copy. Though the woman was an experienced voice artist and could control her plosive "p" and "t" sounds, the man was not as talented and I had to use a pop filter.

I'm used to working with large-diaphragm tube mics that exhibit some frequency peaks and proximity effects, and I can often use those to good advantage with the spoken word. The Curtis AL-2 system demonstrated no frequency peaks and seemed quite flat. Even its proximity effect is very subtle. This was a benefit on the woman's voice, which came across clear and solid. The male voice required a bit of low-mid EQ to make his sound more intimate, but his track did not sound in any way thin.

This system really shines on drum overheads, percussion and acoustic

guitar. Its elongated cardioid pattern does an excellent job of rejecting sounds from the rear while still covering a wide area in the front, which is a distinct advantage in a live recording environment. Curtis Technology sells the AL-2 Stereo Microphone System in the U.S. at a direct price of $2,995. outside the U.S., the mics are sold through distributors.

Curtis Technology & Trade, www.curtis-technology.com






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.