Lawson L47MP, May 1998

May 14, 2004 12:00 PM, By Michael Cooper

TUBE CONDENSER MICROPHONE

Polls


Mix Regional

The Mix Regional section for Mix's September 2014 issue focuses on Miami. Send us your studio news: updates, sessions, new rooms, plus club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

I often find the pro audio products made by small companies to be more compelling than those mass-produced by larger corporations. The niche designer (frequently also the president of the company) usually has an idealism and obsession with audio that I relate to. Unfortunately, the result is often a stringently engineered, rapturously musical product that costs too darn much for my pocketbook. Not so with the Lawson L47MP, a supremely crafted, stunningly musical microphone that, at $1,995, most professional studio owners can readily afford.

STRIKING APPEARANCE
The L47MP is a multipattern, large-diaphragm tube condenser. Straight out of its bombproof (airtight and watertight) Pelican storage case, the L47MP makes a bold statement. Shaped much like an U47 and measuring an impressive 9¾ inches long and 23/8 inches in diameter, virtually its entire body—including cable connector and double-mesh head grille—is plated in 24-karat gold. It’s a look you’ll either love or hate. Virtually all of my clients think it looks gorgeous, and I agree.

Underneath the gold veneer, the mic’s body is machined from solid brass, bead blasted and plated with nickel. Its substantial weight (two pounds) and solid construction inspire confidence.

The Pelican case ships with the mic. Also included is a sturdy, proprietary power supply and companion 6-foot, three-prong, detachable IEC power cord. A knob on the power supply allows you to make continuously variable adjustments to the mic’s polar pattern, from omni to cardioid to bi-directional (and all patterns in between). A 30-foot, shielded Mogami cable (fitted with gold-plated Neutrik connectors) is provided for hooking up the L47MP to a locking 6-pin XLR connector on the power supply; this delivers power to and audio from the mic. Other features of the power supply include a switch for padding the mic 12 dB, a power switch with inset red LED and a 3-pin male XLR for audio output to your mixer/mic pre.

The 12dB pad comes after, not before, the output stage. From a user’s perspective, I think most tube mics are better off padded than pre-attenuated. The latter scheme often degrades the already critical signal-to-noise in tube designs past the point of usefulness. Lawson’s design makes sense.

A swiveling mic adapter, made of high-impact plastic, is also supplied with the L47MP. As the capsule element is internally shock- mounted, an external suspension mount is not needed. The mic is secured by sliding its wide-diameter connector base into the adapter’s split O-ring clamp, which is opened and closed by tightening a knurled knob. This arrangement is the most hassle-free and foolproof scheme for hanging a mic (upside down or right side up) I’ve seen. In fact, the complete microphone system—right down to the rubber feet on the power supply—demonstrates extensive forethought and impeccable construction quality. This product is a joy to use.

INSIDE DETAIL
The L47MP’s capsule features dual 1-inch-diameter, gold-sputtered membranes. Gene Lawson (president of Lawson Inc.) modeled the capsule’s design after the M7 capsule used in the Neumann U47 and M49 microphones, with modifications. For example, the diaphragms are only 3 microns thick (the original M7’s were 7 microns) to optimize transient and high-frequency response. Each capsule is precision-machined from solid brass and then hand-lapped in the Lawson lab.

At the heart of the L47MP is the venerable 6072 vacuum tube, coupled through a Jensen transformer. Lawson stringently tests and selects the tubes for all its mics to meet low-noise guidelines. Additionally, a low-loss tube socket is employed, which uses military grade, heavily gold-plated beryllium copper contacts for better grip, low contact resistance and extended life.

The L47MP’s sensitivity at 1 kHz is rated a modest 11.4 mV/Pa, and the A-weighted equivalent noise level is 22 dB SPL—typical specs for a tube mic. The maximum SPL for 1% THD at 1 kHz is a very modest 117 dB, suggesting careful placement on loud signal sources.

A cardioid-only version of the L47MP, the L47C, is available for $1,695. Both mics are only sold factory-direct, which partially explains how the prices can be kept so low.

THE SOUND
As with all multiple-pattern condensers, changing the L47MP’s polar pattern results in a change of timbre, making for a very versatile mic. The omni pattern exhibits a dip in the 3 to 5kHz range, and a broad peak centered roughly at 10 kHz. As you increase the L47MP’s directionality, the timbre becomes more and more present as midrange response is boosted and very high frequency response is diminished. The mic sounds quite bright in bidirectional mode.

My first critical listening test was an A/B/C comparison of the Lawson L47MP, RØDE Classic and AKG C-12VR microphones, all set to cardioid and recorded to separate ADAT tracks via a Millennia Media HV-3 preamp and the Yamaha 02R’s 20-bit converters. The sound source was female spoken word. The L47MP has a deeper bottom than the

Classic; I liken it to an AKG TLII on steroids in this regard. But the L47’s bottom is not accentuated in the upper bass as with the C-12VR, which has by far the overall biggest bottom of the three mics (not necessarily always a good thing). The L47MP is more present in the midrange frequencies than both the Classic and the C-12VR, which have a darker sound even though they both offer more high-end sizzle and better transient detail. All three mics have an uncanny ability to make a sound source fatten or grow in perceived size, a cherished characteristic of the best tube mics. In this regard, the L47MP sounds fatter than the Classic, but the C-12VR takes the grand prize. The C-12VR is also the smoothest-sounding of the three mics.

IN SESSION
When you tuck vocals recorded with an L47MP into a mix, something magical happens. The track somehow manages to sound incredibly fat, yet retains its presence. All the warm, lush texture you would want from a tube mic is there.

Male rock and jazz vocals both had a tight, full bottom and a velvety fat yet clear sound. Although these tracks were not extraordinarily detailed up top, they nevertheless sounded more than adequately articulate. This quality makes the L47MP a good choice for recording sibilant singers.

Next up were some female vocals, recorded via the HV-3 to 24-bit digital (the 02R’s V2 software allows you to record 24-bit audio onto two ADAT tracks; you gotta hear this!). Six inches from the mic in cardioid mode, the singer sounded warm yet clear, with a beautifully soft and shimmering high end.

The L47MP has a very flattering proximity effect, but tends to overload when you’re screaming right on top of it. The “wide cardioid” position usually yielded the best results for recording lead vocals; the figure-8 pattern often sounded too bright for this application. The hypercardioid mode’s moderately boosted presence was just the ticket for recording male rock backing vocals. A testament to this mic is that I rarely had to employ any EQ to vocal tracks at mixdown (the one exception being some low shelving EQ for a vocalist who almost ate the mic).

The next task was recording a variety of Native American wood flutes with timbres ranging from dark and soothing to bright and almost shrill. The deeper and darker the inherent tone of the instrument, the more directional pattern was called for. On mid-sized flutes, the L47MP’s cardioid pattern was chosen for its softer, darker midrange and breathy highs. The mic’s figure-8 pattern sounds more present yet less detailed; this was a more complementary timbre for some bassier flutes that had a raspy or beady high end.

Overall, the L47MP lent a rich, fat, warm, golden tone to the bigger flutes. But on the smaller, soprano range flutes, the L47MP was a tad too bright. The C-12VR produced a more flattering, softer, darker timbre on those instruments.

The L47MP’s combination of warmth and presence make it a natural for recording electric jazz guitar. The mic never sounded harsh or glassy; instead, the sound was soft and round. Perfect! Similarly, I got excellent results miking up the Leslie cabinet on an XB-2 Hammond organ with the L47MP’s mode set approximately to supercardioid (only the omni, cardioid and bi-directional modes are marked on the power supply).

Finally, I miked the cabinet of an electric bass guitar in figure-8 mode. This pattern’s hyped midrange and understated highs gave me the hard-driving tone I was looking for on this rock ’n’ roll session. The timbre was perfect for rock bass: present, huge and with a big, tight bottom.

CONCLUSIONS
If you’re in the market for a world-class tube condenser, you cannot go wrong with the L47MP. It has the uncanny ability to sound great on almost any vocalist, as well as on a wide variety of instruments. The L47MP’s construction is impeccable, it looks great, and it’s quite affordable. What more could you ask for? I cannot praise this microphone enough. Don’t wait—buy it.

Lawson, www.lawsonmicrophones.com






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.