Symetrix Celebrates 30 Years

Apr 19, 2007 3:00 PM

Polls


Mix Regional

The Mix Regional section for Mix's May 2014 issue focuses on Nashville. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

From top to bottom: AirTools 6200 (released in 2005), Symetrix 628 (1997), Symetrix 528E (1993), Symetrix 601 (1992) and the original Symetrix 528 (1983).

In the early 1970s, Symetrix founder Dane Butcher worked as a recording engineer with members of Return to Forever and helped engineer Herbie Hancock's Head Hunters. He was captivated by recording equipment and envisioned creating affordable, high-performance signal processors. "I had too many product ideas to continue recording!" Butcher laughs.

Butcher took a job working for Greg Mackie at Tapco and learned to design electronics. In 1976, only six months after taking the Tapco job, Butcher started Symetrix in an artist's loft and former garment factory in the Belltown area of Seattle. Butcher and his first employee, James Husted, found they could supplement their modest Symetrix income by doing repair work and studio maintenance around town.

A surplus electronic components company was located across the street, and with their parts Butcher manufactured the very first Symetrix product, the SG-1 Signal Gate, as well as the company's subsequent compressors, limiters and phasers. Symetrix' first products were aimed at the studio and live P.A. markets. After about two years, the small Symetrix team was able to work full-time for the company.

As the years went on, Butcher and his team developed a knack for finding and fulfilling unmet needs in related markets. "By the early 1980s we'd had some success in the broadcast market making telephone interfaces for talk shows," Butcher explains. "We wanted to do more, and so we thought, what about the very front end? There was no inboard processing on a broadcast mixer, so we put together a good mic pre, a compressor/limiter tweaked for broadcast, a downward expander, a de-esser and a 3-band parametric EQ, all in one box. It wasn't a giant engineering feat. We only had to combine technologies that we had already mastered in other products." The result was the 528 Voice Processor, an early hit.

The company applied that same ingenuity to the installed sound market. "For a small signal processing company, we go across a large number of markets," Butcher says. "However, we came to the conclusion that those markets were having trouble identifying with one company that could work in so many different areas. They were used to companies that vertically aligned themselves. We decided to communicate our dedication to each market by branding our products accordingly."

With that decision, the Lucid, AirTools and SymNet brands were launched. The Lucid brand serves the digital recording studio market with low-jitter converters and master clocks; the AirTools brand serves the broadcast market; and the SymNet brand serves the installed sound contractor market with general purpose DSP products that are expandable and scalable.

For more information, visit www.symetrixaudio.com.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.