K.C. Porter

Apr 1, 2002 12:00 PM, BY GARY ESKOW

Polls


Mix Regional

The Mix Regional section for Mix's July 2014 issue focuses on Atlanta. Send us your studio news: updates, sessions, new rooms, club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

There are many roads to success, and K.C. Porter's parents steered him down the road less traveled. His dad was an orchestrator whose credits included arranging music written by Nathan Scott (sax great Tom Scott's dad) for the television hit Lassie. Their strong feelings for the Baha'i faith led the Porter family on a faith ministry to the dusty streets of Guatemala. There, Porter absorbed the rhythms and harmonies of Latin music.

The pull of his native country was strong, however, and Porter returned to California to study music at Cal State Stanislaus. Armed with his knowledge of Latin music and the Spanish language, Porter was hired as a staff arranger at A&M Records before he'd even graduated. Within a few years, his career had developed along two parallel lines: Major English-language acts, including Boyz II Men, Sting, Bon Jovi, Brian McKnight and Toni Braxton, sought Porter's help in their efforts to expand their audiences with Latino listeners — Porter worked as a vocal coach and producer. At the same time, he was helping to break Ricky Martin and other Latino artists into the Anglo market.

Things came together in a big way for Porter in 1999, when a pair of projects he worked on became huge hits. Carlos Santana's Supernatural featured Porter's writing, producing and singing (he would win a pair of Grammys for this work), and he wrote and produced material for Ricky Martin's debut album in English. More recently, Porter received a Producer of the Year nomination in the Latin Grammy Awards. In addition to his commercial recording work, Porter is the creative director of Oneness, a nonprofit organization whose goal is to eliminate racism and promote racial unity through music and the arts.

We caught up with this busy young producer in his studio near Malibu, Calif.

Does being dubbed the white guy who understands Latin music get old?

It helps in certain contexts, and it may be an interesting angle about me. I also end up being the bad guy in the studio at times. We deal with great artists every day, but the work they do with me is hard.

Artists like Chaka Kahn or Jon Bon Jovi might not be experienced singing in Spanish. I break down every syllable to make sure the performances are perfect. That's hard work. Sometimes I feel like my job is being producer, engineer, translator, vocal language and vocal coach. I have to do everything! There are different types of producers. Some are hands-off; I'm definitely hands-on.

You've worked with some artists who have enjoyed long careers, particularly Carlos Santana. How can artists keep from repeating themselves while still maintain the signature elements of their sound?

Let's consider Santana. He was at the point in his career where he'd done a lot of albums. He was hoping that this album would crack open the wider market for him. Carlos knows himself, he knows that who he is and what his music is all about will never be lost. And so he was open to letting himself be produced on Supernatural. He trusted the people around him. For example, I was so flattered when I'd ask him what he wanted to play and he'd turn the question back to me.

What did you bring to Santana on that project?

I produced four tracks and sang on one, “Primavera,” which I wrote. I was hoping to get him music that was in sync with his spiritual side. “Primavera” ended up being one more color in the picture Carlos was trying to paint. He's very color-conscious and likes to think of music like a painting. He'd say, “It sounds 2-D rather than 3-D!” So how do you achieve that next dimension? More reverb, less compression? I was often trying to translate his images into engineering terms.

What do you do best?

I'm a restive soul, and I like to do a lot of things. It may spread me too thin at times, but if I can write a song today, produce a song in a week and do some programming in between, I'm happy!

Right now, I'm executive producer on an album for Laura Pausini, who's Italy's Number One female artist and one of the top Latin artists in the world.

How involved do you get with the recording process itself?

Very. Microphones intrigue me the most. I adhere to the principle that says if you can record things right, you don't have to fix them later. Every time I open a copy of Mix, I study who's using what mics! I like to be as pure as possible in this area.

I recently worked with Allan Sides at Capitol Studios. I was complementing him on how great his sound is and was asking him about equalization. I noticed that he was using a pair of Neumann M50s on the orchestra. He also had some other mics set up for closer work, but I noticed that when he soloed the M50s, the orchestra sounded great; his balance was impeccable.

I rely on my [Neumann] U47s a lot. I'll stick one on a nylon string guitar. Even though I may have to add a little high end in the mix, I know that the U47 will give me the body I need. I also use [Neumann] KM84s on guitars, as well.

One story you might find interesting involves the guitarist Raymond Stagnaro. We were doing an instrumental version of the song “Casi Un Bolero” on Ricky Martin's Vuelve album. We set Raymond up with a 47 and let him rehearse the song all the way through while recording him. Benny Faccone, who mixed this album, and I were listening and realized his performance was perfect. The song wasn't even listed on the album, but it's there! Again, most people wouldn't ever think of using a 47 on a guitar because it doesn't bring out the high end, but the size it gives is great.

Can you describe your home studio setup?

We have a 96-input Euphonix CS2000 console with their 3000 software. I felt that this board would be a good, real-world interface. Pro Control might work better with Pro Tools, but we do lots of mixes that aren't Pro Tools related. With Santana, for example, we tried to make sure everything was analog, complemented with Pro Tools. We relied heavily on our Studer 827. I've resisted being fully Pro Tools-based. Space is also a consideration for us. If we had more room, we'd probably have a big [SSL] 9000 in here.

We have a lot of vintage gear, including racks of Neve stuff. We did everything on Supernatural using a Neve 8038. I really liked the sound of that board, but it only had 32 inputs, so I tore it apart and kept as many of its modules as I could. We've also got tons of API stuff. I'd really love to find an amazing hardware reverb unit. All of the great old stuff is hard to get serviced.

How do you interface your studio with the outside world?

With Santana, I take 2-inch tape reels around. Most of what I do these days is done in my studio here in the mountains near Malibu, where I live with my wife and daughter. If I'm doing overdubs in another city, I might try to get swappable drives for Pro Tools.

What engineers do you like to work with?

Jeff Poe worked with us on a lot of Santana's stuff. He's a phenomenal engineer who's got a natural sense of how to go about things. Jim Scott did a lot of tracking for Santana. Jim Gaines worked on the album in the Bay Area. He did all the Huey Lewis records that sound so good! We also have a full-time in-house engineer, Luis Quine.

Has your work method changed as you've taken on production assignments for more visible clients?

I've been a programmer and keyboard player for so long that it got to the point where I was sitting down all the time. I'd go into the studio and work, then eat, then come back into the studio and sit some more. I had to stop sitting so much!

Seriously, the role of executive producer requires some distance and objectivity. By hiring the best programmers and players, I can see the whole project, not just a part of it. The good thing is that I know every little thing that's going on. If an engineer plugs in the wrong compressor for a vocal, I'll ask for the [dbx] 160 rather than the 160X. It's like being a contractor who knows everything about putting together a house, but oversees other people. I do want to get back to some more hands-on work, though. For a while I was working so hard that I had to stop. I didn't know what happened for the first four years of my daughter's life! We've recently adopted another daughter, and I want to be there for her.


Gary Eskow invites readers to check out his Website, www.garyeskow.com.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.