Classic Tracks: Buddy Holly "That'll Be the Day"

Feb 1, 2011 9:00 AM, By Ron Skinner

Polls


Mix Regional

The Mix Regional section for Mix's September 2014 issue focuses on Miami. Send us your studio news: updates, sessions, new rooms, plus club performances and installations. Let the Mix audience know what is going on! Send photos and descriptions to mixeditorial@nbmedia.com.

Some of the gear used to record

Some of the gear used to record "That'll Be the Day," from top: Norman Petty's Ampex 350 tape machine, and RCA 44 and RCA 77 ribbon microphones

“That’ll Be the Day” had been written in the spring of 1956 in Allison’s bedroom after Holly and Allison had seen the John Wayne film The Searchers. In the film, Wayne’s character repeats the phrase “That’ll be the day” several times. “We started writing the song one day when we were practicing,” Allison recalls. “I had a big bedroom at my folks’ house where I kept my drum set, and Buddy had his guitar, and we were just practicing and fooling around with the guitar. Buddy said we ought to write a song, and I said, ‘That’ll be the day,’ and Buddy said, ‘That’s a good idea,’ and in about 30 minutes we wrote us a song.”

At the time of the session at Petty’s studio in February of 1957, “That’ll Be the Day” seemed quite old to Holly. He had unsuccessfully recorded it for Decca eight months earlier, and while the band had rehearsed the song and had it ready, Holly’s focus was on a newer song called “I’m Looking for Someone to Love,” which he thought would make a better A-side.

Sessions at Petty’s studio usually started in the evening. The studio, at 1313 7th St., was in a building that had once housed a family-run grocery store. Its proximity to 7th Street, the main thoroughfare in and out of Clovis, meant a lot of traffic noise during the day, so recording at night was the only practical way to use the studio. This, coupled with the fact that electricity was more reliable at night, made all-night recording sessions the norm.

The recording space was hand-built by Petty in the early 1950s. It measures a cozy 20x24 feet and features individually tuned polycylindrical walls that run vertically on one wall and horizontally on the opposite, with no two surfaces in the room running parallel. Plush curtains cover the cement outer wall, while fabric and carpet are used to diffuse reflections throughout the room. Tall sound baffles, referred to as “drum walls” by Gary and Ramona Tollett, were used to isolate singers and instruments. Double-paned windows provide views between the tracking room and the small control room, between the tracking room and an additional iso booth/waiting room, and between the control room and iso booth. Down a narrow hall that runs behind the studio floor are three more rooms: a kitchen, bathroom and sleeping/living quarters. Petty’s studio was a fully equipped residential retreat recording studio—a concept that was decades ahead of its time.

Recording “I’m Looking for Someone to Love”/“That’ll Be the Day” began around 9 p.m. on that cold Sunday evening in February. “I’m Looking for Someone to Love” was new, and the band needed several hours of rehearsal and a number of takes to record the song; they got the final take somewhere around 2 a.m. With Monday-morning responsibilities looming back in Lubbock, the group began recording what was to be the demo’s B-side: “That’ll Be the Day.” Luckily, that song was well-rehearsed; the song had become a standard for Holly and his group, and Allison says it was a hit with the kids of Lubbock long before it was a hit record: “We had played it in between [sessions]; we played it at dances. They liked to dance to it, and we got a good feeling and reaction from it.” Because the song was so familiar, the B-side only took two takes to record.

For the recording of “That’ll Be the Day,” all of the musicians and singers were on the main studio floor: drums, acoustic bass, electric guitar, Holly singing the lead and the trio of backing singers. Knowing this while listening to the recording is evidence that a great deal of work and thought went into the building of this acoustic space.

A 5-channel Altec broadcast mixer was the heart of the small control room. The mixer had been modified to allow signals to be sent to an echo chamber in the attic of the service station next door. The echo chamber featured no parallel surfaces and a concave plaster ceiling with tiled floor and walls. It had been built by Petty with Holly’s father and brother, who owned a tile business. The studio’s main tape machine was a mono Ampex 350 purchased in 1955. A secondary portable Ampex 350 was used for playback when sound-on-sound overdubbing was required, and monitoring took place via Altec 604 speakers. On the studio floor, classic ribbon and tube microphones were used to capture the instruments and vocals. RCA 44 and 77 models, Bang and Olufsen Fen-tone, Altec M-11 and Telefunken U47 mics were all used by Petty at this time.

With the demos recorded, the next step was to take them to record companies in hopes of landing a contract. When attempts to interest Roulette and Columbia in the songs failed, Petty brought the recordings to Murray Deutch, who worked for Southern Music, Petty’s publisher. Deutch gave the demo to Brunswick Records’ Bob Thiele, who saw potential in “That’ll Be the Day.” In May 1957, Thiele convinced Brunswick to release the demo as a single by The Crickets. The terms of his previous deal with Decca prohibited Holly from re-recording the song for another label, so Petty and Deutch hatched the plan to release it under a group name in place of Holly’s name alone.

The record took a little while to catch on, but thanks to Thiele’s support, “That’ll Be the Day” became a Number One hit and a million-seller in the fall of 1957, and Holly became a rock ’n’ roll star of the highest order. Today, more than 50 years after Holly’s tragic death in the plane crash that also took the lives of the Big Bopper and Ritchie Valens in 1959, you can find the original Decca master of “That’ll Be the Day” on YouTube. On it, Holly sang high above his customary vocal range, and the reverb-y sound seems like an attempt to turn the singer into a Gene Vincent type. It took the faith and perseverance of Holly, Petty, and then Deutch and Thiele to deliver Holly’s authentic, unique sound to the public.


Ron Skinner is a producer/recording engineer for CBC Radio. This article is part of a planned book about the career of composer/producer/studio owner Norman Petty.

The Difference in the Details

After the success of “That’ll Be the Day,” Buddy Holly began releasing material under his own name on Brunswick’s sister label Coral in tandem with releases by The Crickets on Brunswick—although all the recordings were performed by essentially the same group of musicians, with Buddy Holly, Jerry Allison and the new addition of Joe B Mauldin on bass as the core group. This decision was made in order to maximize the potential of the material that Buddy Holly and The Crickets would record with Norman Petty in Clovis over the following 18 months.

In the early days of rock ’n’ roll, singles were king in the marketplace, and Brunswick and Coral would release the material at a break-neck pace when compared to how music is released and promoted today. As the music was recorded, a decision was made either to release the song as a Buddy Holly record or as a one by The Crickets. The general distinction between the two types releases concerned the addition of backing vocals to the Crickets’ recordings. The Buddy Holly material was usually more sparsely arranged. “That’ll Be The Day,” the first single by The Crickets included backing vocals, and because of that, it most likely set the standard for the sound of future releases by The Crickets. “When the record came out, it said Vocal Group with Orchestra and we weren’t a vocal group at all,” explains Jerry Allison. “Joe B and I, we still can’t sing.”

In fact, most of the musicians on “That’ll Be The Day,” as well as the other Crickets and Buddy Holly releases, did not get credit until years later. Larry Welborn, who played bass on “That’ll Be The Day” but was not a member of The Crickets, wasn’t even aware at the time that he had played bass on the released version of the song. “I didn’t know it was me on the bass for quite a while, maybe a couple years later when Joe B told me about it.” In all, there were three vocal groups who sang the backing vocals on the Buddy Holly and The Crickets recordings: the husband and wife team of Gary and Ramona Tollett on “That’ll Be The Day,” a vocal group called The Picks, and later, a vocal group called The Roses, who also sang with Roy Orbison. None of these performers would be given credit for their work until the advent of the CD and the re-issue boom of the 1980s.






Acceptable Use Policy
blog comments powered by Disqus

Mix Books

Modern Recording and Mixing

This 2-DVD set will show you how the best in the music industry set up a studio to make world-class records. Regardless of what gear you are using, the information you'll find here will allow you to take advantage of decades of expert knowledge. Order now $39.95

Mastering Cubase 4

Electronic Musician magazine and Thomson Course Technology PTR have joined forces again to create the second volume in their Personal Studio Series, Mastering Steinberg's Cubase(tm). Edited and produced by the staff of Electronic Musician, this special issue is not only a must-read for users of Cubase(tm) software, but it also delivers essential information for anyone recording/producing music in a personal-studio. Order now $12.95

Newsletters

MixLine

Delivered straight to your inbox every other week, MixLine takes you straight into the studio, with new product announcements, industry news, upcoming events, recent recording/post projects and much more. Click here to read the latest edition; sign up here.

MixLine Live

Delivered straight to your inbox every other week, MixLine Live takes you on the road with today's hottest tours, new sound reinforcement professional products, recent installs, industry news and much more. Click here to read the latest edition; sign up here.

[an error occurred while processing this directive]

The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the The Wire for the latest press postings.